Archive | 22:23

Cutting The Stones

25 Mar
Vinyl drawn and ready to cut

Vinyl drawn and ready to cut

I do a lot of drawings and many of them become the basis of prints. I’ve selected 9 of my recent drawings of ancient Neolithic stone monuments to develop into linocuts. Well, I’m using soft cut vinyl instead of lino but the final print will look the same. The vinyl is very easy to cut so my cutting tools go through them with little resistance. I started off by dividing my 30 x 30 cms vinyl block into 9 squares and then redrawing my stones in reverse using a white conte crayon.


Vinyl - first cut

Vinyl – first cut

Then I cut into them with my Flexcut tools, using the Flexistrop to keep the tools sharp. I’ve kept the cutting minimal at this stage; I’ll check out the image by taking a rubbing with tissue paper and a block of graphite to check what’s there and cut into them some more if I need to. It’s better to cut too little rather than too much – you can always cut out a bit more, but you can’t put any back.

%d bloggers like this: