Archive | 22:32

The Right Combo

17 Jan
mono-10-chine

Mari Lwyd (with chine colle)

Spent the day at Swansea Print Workshop making more monotypes based on the drawings I did while I followed around two local Mari Lwyd in December and January. I’m experimenting to find the right combination of ink, paper and glue (for the chine collé). I originally used Bockingford, Somerset then switched to a vintage paper by J Green & Sons (supplied by the Vintage Paper Co in Orkney). Today I just used the J Green paper which doesn’t need soaking, just a little spritz of clean water

Last time I tried out Intaglio Printmaker’s Litho / Relief oil-based ink with varying amounts of Extender but found it too tacky, it was quite hard to work the drawing onto the plate and it didn’t want to release the chine collé when it went through the press, so today I gave Caligo Easy Wash Relief ink a go. It worked much better although it was too loose to hold fine detail through the printing press.

Previously, I tried Pritt for the chine collé but today I used ‘YES’ paste which was much easier to apply and stuck the light tissues to the main print perfectly. Very impressed with it. I’ve changed everything from my starting point, it can take some time and experimentation to get the right combo.

mono-10-ghost

The ‘ghost’ print

After taking the first print with chine collé, I put another sheet of the dampened J Green paper onto the plate and took a ‘ghost’ print which I will work into with artist-quality oil pastels or maybe collage.

 

 

I am putting my series of drawings of ancient Welsh monuments on Artfinder.  If you want to buy one, you can see them by clicking on the image below or the Artfinder link at the top right of this page.

St Elvis

%d bloggers like this: