I took part in a Zoom art session recently which is inspired by Swansea’s industrial heritage. Copper Crucibles is a two part course, making small clay crucibles in moulds on one day and then, when lockdown restrictions are lifted and we can get out and about, we’ll be doing a raku firing for part 2.Continue reading “Copper Crucibles Part 1”
Tag Archives: copper
B.I.G. And Baked
After I filed and degreased my new copper etching plates, I cleaned and prepared a section of the inking up area of Swansea Print Workshop to apply Andrew Baldwin‘s B.I.G. hard ground to the surface of my plates. It’s built up in thin layers until there’s a fine, even amount of ground on the plate.Continue reading “B.I.G. And Baked”
File And Degrease
Take a sheet of warm, shiny copper. File the edges, first with a coarse file, then two successively finer ones to make a gently bevelled edge. Smooth the corners so they are slightly rounded. Flip the sheet over and gently remove the burr around the back edge with the finest file. Then take the copperContinue reading “File And Degrease”
Copper And Stone
I etched two plates at the recent course at Swansea Print Workshop with Andrew Baldwin of Trefeglwys Print Studio, one aluminium, one copper. I’ve just done a first proof from the copper plate. I used a hardground and the traditional technique of drawing into it with an etching needle than adding aquatint. Andrew demonstrated howContinue reading “Copper And Stone”
scribblah 